|
PSKBL202D
230 Vac kit for double hinged gates with a maximum length of 2 metres and a maximum weight of 150 kg. The kit consists of:
-
2 self-locking operator arms,
type BL202
-
1 electronic programmer,
type PRG811
-
1 radio receiver card,type
RSQ449200
-
1 weatherproof cover for programmer and receiver
(see picture)
-
2 two-channel radio transmitters (handsets),
type TRQ449200
-
1 photoelectric safety beam,
type CDR861
-
1 Adjustable rear wall bracket 2 type
BL201STAP
-
1 Adjustable front plate 3 type
BL201SUAR
-
Connection cables 1
1 Cables are supplied to connect the components, and to connect to a mains supply within 50 metres of the programmer.
2
The bracket has to be mounted so that its centre is 120 mm from the
pivot point of the gate; in practice this means that the gate pillar
must have a cross section of at least 160 mm (6 in) square. The bracket
has to resist considerable force and will need to be attached to wooden
supports by bolting through, or to brick piers by using high performance
anchor bolts (not supplied).
3 On wooden gates it may be necessary to reinforce the bars or cross members on which the operator arm front end is mounted, with the supplied adjustable front plate.
|
